MIS-PVS Insulation Resistance Tester for PV (Judge Deterioration Point)

Multi

No reviews yet Write a Review
SKU:
MULTI-MIS-PVS
AED0.00
AED0.00

Description

MULTI MIS-PVS Insulation Resistance Tester for PV (Judge Deterioration Point)

The MULTI MIS-PVS is a specialized digital insulation resistance tester developed for photovoltaic (PV) systems. Unlike conventional insulation resistance testers, which may not provide proper measurements while PV panels are generating power, the MIS-PVS is designed to measure insulation resistance in PV systems under generating conditions by contacting the specified test points.

The instrument provides two selectable measurement ranges to accommodate different PV system voltage levels. The PVL range uses a rated measuring voltage of 500 V for systems below 500 V, while the PVH range uses a rated measuring voltage of 1,000 V for high-voltage PV systems above 500 V and below 1,000 V.

A key function of the MIS-PVS is its insulation deterioration point indication. When the measured insulation resistance is below 1 MΩ, the LCD can indicate the location of the insulation failure point in the specified PV panel measurement configuration. The indication divides the panel into 10 sections between the P and N phases, helping identify the section associated with the insulation problem. This location indication is specifically intended for PV panel measurements and is not valid for other measurement objects.

The MIS-PVS also provides DC voltage measurement from 0 to 999 V, a 3½-digit LCD with a maximum reading of 3,200 counts, bar graph indication, automatic range selection, Data Hold and LCD backlight. An automatic discharge function helps discharge stored DC electrical charge after insulation testing, while the HV indicator provides a visual indication associated with high-voltage output and discharge confirmation.

With dimensions of 170 × 105 × 52 mm and an approximate weight of 350 g without batteries, the MIS-PVS is designed as a portable instrument for PV system inspection and maintenance.

Main Measurement Functions

  • PV insulation resistance measurement – PVL: 500 V

  • PV insulation resistance measurement – PVH: 1,000 V

  • DC voltage measurement – 0 to 999 V

  • Insulation deterioration point indication for specified PV panel measurements

Key Features

  • Specially designed for photovoltaic systems

  • Measurement capability during PV power generation, following the manufacturer's procedure

  • Two selectable PV insulation measurement ranges

  • LCD indication of insulation deterioration point when resistance is below 1 MΩ

  • 3,200-count LCD with bar graph

  • Automatic range selection

  • Data Hold and LCD backlight

  • Automatic power-off after approximately 10 minutes

  • Automatic discharge function for stored DC electrical charge

  • HV output indicator

Important Safety Information

PV modules can continue generating electrical power and voltage during testing. Follow the manufacturer's instruction manual carefully, including the specified PV disconnection and test-lead connection procedure. The instrument must be operated only within its rated measurement specifications and by personnel familiar with electrical safety procedures.

Extra Information

Brand:
Multi
Product Type:
Digital Insulation Resistance Tester for PV Systems
Application:
Photovoltaic (PV) Systems
Insulation Measurement Range:
PVL / PVH
PVL Rated Measuring Voltage:
500 V
PVL Maximum Effective Display:
100 MΩ
PVL Center Display Value:
2 MΩ
PVL First Effective Range:
0.1 MΩ – 50 MΩ (Less than ±5% )
PVL Second Effective Range:
0.05 MΩ – 0.1 MΩ; 50 MΩ – 100 MΩ (Less than ±10% )
PVH Rated Measuring Voltage:
1,000 V
PVH Maximum Effective Display:
2,000 MΩ
PVH Center Display Value:
50 MΩ
PVH First Effective Range:
2 MΩ – 1,000 MΩ (Less than ±5% )
PVH Second Effective Range:
1 MΩ – 2 MΩ; 1,000 MΩ – 2,000 MΩ (Less than ±10% )
Insulation Deterioration Indication:
Displays deterioration point when insulation resistance is below 1 MΩ
Deterioration Point Display:
10 sections between P and N phases; specified PV panel measurement only
DC Voltage Range:
0 – 999 V DC (±1.5% rdg ±10 dgt )
Display:
3½-digit LCD, maximum 3,200 counts, bar graph and annunciator
Display Ranges:
3.200 / 32.00 / 320.0 / 3200 – 4 automatic ranges
Minimum Resolution:
0.001 MΩ
Measuring Method:
Dual integration mode for insulation measurement
Data Hold:
Yes
Backlight:
Yes
Automatic Discharge Function:
Yes
Auto Power Off:
Approx. 10 minutes
PVL Rated Measuring Current:
0.0218 mA (−0% to +20%)
PVH Rated Measuring Current:
0.0435 mA (−0% to +20%)
Short-circuit Current:
Less than 2 mA
No-load Voltage:
Less than 130% of rated voltage
Operating Temperature:
0°C to +40°C
Operating Humidity:
Less than 80% RH, non-condensing
Power Supply:
6 × AA (LR6) 1.5 V alkaline batteries
Dimensions:
170 × 105 × 52 mm
Weight:
Approx. 350 g without batteries