Description
The DF Electric 22×58 gG Cylindrical Fuse Link with Striker is designed for general-purpose overcurrent protection in electrical installations. It provides protection against overloads and short circuits in cables, power distribution circuits, and electrical equipment when correctly selected for the application.
Part of DF Electric’s cylindrical fuse link range, this product combines the gG operating class with a striker mechanism designed for use in compatible fuse holders equipped with an appropriate microswitch. This arrangement enables the operation of the fuse to be detected through an auxiliary switching system, supporting electrical status monitoring and maintenance procedures.
The 22×58 mm format is intended for compatible cylindrical fuse holders, including the DF Electric PMX 22×58 range. Before installation, users should verify the fuse holder compatibility, rated current, operating voltage, and breaking capacity required by the electrical system.
General-Purpose gG Protection
The gG operating class is intended for general-purpose protection against overloads and short circuits. When the fuse link is selected according to the circuit requirements, it helps protect conductors and connected equipment against excessive current.
Selecting the correct rated current is essential. The appropriate fuse rating depends on the protected conductor, the expected operating current, the installation conditions, and the applicable electrical protection requirements. The rated voltage and breaking capacity must also be suitable for the system in which the fuse will be installed.
The DF Electric 22×58 gG range includes different rated-current options. The available voltage rating depends on the selected fuse rating, so the product variant should always be checked against the manufacturer's technical documentation before ordering or installation.
Striker Mechanism for Auxiliary Signalling
Unlike a conventional fuse link without a striker, the With Striker version incorporates a striker mechanism intended to operate a compatible microswitch arrangement in a suitable fuse holder.
When the fuse link operates, the striker can provide a mechanical actuation signal to the compatible microswitch. Depending on the microswitch wiring and the control system, this signal can be used for remote indication, electrical status monitoring, or maintenance-related signalling.
This feature can be useful in installations where fuse operation needs to be communicated to a control panel or another monitoring system. The signalling function depends on the use of a compatible fuse holder, microswitch, and correctly designed auxiliary circuit. The fuse link alone does not provide an electronic communication or remote-monitoring function.
Before selecting this version, confirm that the intended fuse holder supports the striker mechanism and that the associated microswitch is suitable for the application.
Construction and Design
The fuse link features a ceramic body and silver-plated copper contacts. These construction materials form part of the fuse link's electrical and mechanical design.
The ceramic body is designed to withstand the thermal and pressure conditions associated with fuse operation. The contacts provide the electrical connection between the fuse link and its compatible fuse holder.
The internal fuse element is designed to interrupt excessive current under the conditions specified for the product. Correct fuse selection, proper installation, and use within the manufacturer's rated operating conditions are necessary for the intended protection function.
Standards and Environmental Compliance
The product range is specified in accordance with IEC/EN 60269-1 and IEC/EN 60269-2, as stated in the manufacturer's documentation. The range is also identified as RoHS compliant.
Refer to the official DF Electric datasheet for the detailed technical characteristics, dimensional drawing, current-specific ratings, and applicable operating conditions.
Important: Select the fuse link according to the actual circuit requirements and the technical data for the chosen rated-current variant. Verify compatibility with the fuse holder and, where required, the striker-operated microswitch before installation.