10×38 PMX Fuse Holder1Pole WithoutIndicator

DF Electric

No reviews yet Write a Review
SKU:
df-PMXHolder-10*38-WithoutIndicator
AED0.00
AED0.00

Description

DF Electric 10×38 PMX Single-Pole Fuse Holder – Without Indicator

Product Overview

The DF Electric 10×38 PMX Single-Pole Fuse Holder Without Indicator is a modular industrial fuse holder designed for cylindrical fuse links measuring 10×38 mm. Manufactured by DF Electric as part of the PMX series, this fuse holder provides a mounting and electrical connection solution for cylindrical fuse links in industrial electrical installations.

This configuration features a single-pole (1P) design and does not include an integrated visual fusing indicator. It is rated for a nominal current of 32A and a rated voltage of 690V AC or 750V DC, according to the manufacturer's technical documentation.

The PMX series is designed for DIN rail installation and complies with the applicable IEC/EN requirements specified by the manufacturer.

Operating Principle and Main Function

The fuse holder provides a secure housing and electrical connection for a compatible 10×38 mm cylindrical fuse link.

The fuse link is installed inside the holder's carrier. When correctly selected and installed, the fuse link provides the overcurrent protection function by interrupting the electrical circuit under the conditions defined by its operating characteristics.

The fuse holder itself is the mounting and connection component; the overcurrent protection characteristics depend on the compatible fuse link installed inside it.

Technical Design and Construction

The PMX series features a compact modular construction with ventilation zones designed to improve heat dissipation.

According to DF Electric, the product incorporates:

  • Silver-plated copper electrical contacts.

  • High-temperature-resistant plastic materials.

  • Self-extinguishing plastic materials.

  • Materials complying with the European RoHS Directive.

  • A modular design suitable for DIN rail installation.

The fuse holder is designed for cylindrical fuse links with a nominal size of 10×38 mm.

Main Features and Benefits

Single-Pole Configuration

This version is designed with one pole (1P), making it suitable for installations requiring a single-pole cylindrical fuse holder.

Without Visual Indicator

This configuration does not include an integrated fuse status indicator. It is the non-indicator version of the 10×38 PMX fuse holder range.

32A Rated Current

The manufacturer specifies a rated current of 32A for the standard PMX 10×38 fuse holder range.

High Rated Voltage

The standard rated voltage is 690V AC and 750V DC, subject to the applicable fuse link and installation conditions.

DIN Rail Mounting

The fuse holder is designed for mounting on standard DIN/EN rails according to DIN 46277/1-3 (EN 50022).

Silver-Plated Copper Contacts

The manufacturer specifies silver-plated copper contacts for the electrical connection system.

Modular Construction

The PMX series supports modular configurations and offers a range of compatible accessories for installation and assembly requirements.

Applications

The manufacturer identifies this product as an industrial modular fuse holder for cylindrical fuse links.

Its documented function is to accommodate compatible 10×38 mm fuse links in electrical installations. The actual protection application depends on the selected fuse link type, its ratings and the installation design.

Product Version and Configuration

This product is specifically the following configuration:

  • Series: PMX

  • Fuse Size: 10×38 mm

  • Number of Poles: 1P (Single-Pole)

  • Indicator: Without Indicator

  • Manufacturer Reference: 485101

This product must not be confused with the 10×38 PMX versions featuring a visual fusing indicator or with multipole configurations.

Installation and Compatibility

The fuse holder is designed for DIN rail mounting according to DIN 46277/1-3 (EN 50022).

The manufacturer specifies the following connection requirements:

  • Conductor material: Copper wires only.

  • Conductor cross-section for one wire: 0.75–16 mm².

  • Supported conductor types: Solid and stranded.

  • Recommended ferrules for conductors with cross-sections of 2.5 mm² or less.

  • Terminal tightening torque: 2–2.5 Nm.

  • Screw head: Combined SLOT + PZ2.

The product is supplied with the terminals open and ready for connection.

The manufacturer notes that using wire-end terminals may not guarantee the IP20 protection rating.

Compatible Fuse Links

The PMX 10×38 fuse holder range is listed by DF Electric as compatible with the following cylindrical fuse link families:

  • 10×38 gG cylindrical fuse links.

  • 10×38 aM cylindrical fuse links.

  • 10×38 gR semiconductor fuse links.

  • 10×38 aR semiconductor fuse links.

The appropriate fuse link must be selected according to its electrical ratings and the requirements of the installation.

Standards and Compliance

The manufacturer lists the following standards:

  • IEC/EN 60269-1

  • IEC/EN 60269-2

  • UL 4248-1 – Fuse Holders

  • UL 486E – Wiring Terminals

  • CSA C22.2 No. 4248-1 – Fuse Holder Assemblies

  • CSA 22.2 No. 65 – Wire Connectors

The manufacturer's documentation also identifies UL and CSA certifications for the PMX product range.

Extra Information

Brand:
DF Electric
Brand:
DF Electric
Series:
PMX
Product Type:
Cylindrical Fuse Holder
Model:
10×38 PMX
Product Size:
10×38 mm
Number of Poles:
1P (Single-Pole)
Indicator Type:
Without Indicator
Rated Current:
32 A
Rated Voltage (AC):
690 V AC
Rated Voltage (DC):
750 V DC
Rated Power Dissipation:
3 W
Maximum Power Dissipation:
4 W
Protection Rating:
IP20
Rated Impulse Withstand Voltage:
6 kV
Withstand Rating (SCCR):
120 kA (Industrial Fuse Link) / 200 kA (Semiconductor Fuse Link)
Pollution Degree:
3
Utilization Category:
AC-22B (500V AC), AC-21B (690V AC), DC-20B (750V DC)
Operating Temperature:
-40°C to +70°C (with carrier operation)
Operating Temperature (without carrier operation):
-50°C to +80°C
Storage Temperature:
-50°C to +80°C
Contact Material:
Silver-Plated Copper
Conductor Material:
Copper Only
Conductor Cross-Section:
0.75–16 mm²
Mounting Type:
DIN Rail
Mounting Standard:
DIN 46277/1-3 (EN 50022)
Terminal Tightening Torque:
2–2.5 Nm
Product Weight:
60 g (without packaging)
Standards:
IEC/EN 60269-1, IEC/EN 60269-2, UL 4248-1, UL 486E, CSA C22.2 No. 4248-1, CSA 22.2 No. 65
Manufacturer Reference:
485101